Buying guide

Do You Need a Cable Modem? Yes, Here's When

Updated on · By the Cable Modem Reviews team

Yes, you need a cable modem for cable internet. Either rent a gateway from your provider or buy your own modem and pair it with a separate Wi-Fi router. You don't need one for fiber, DSL or satellite service.

On this page (10 sections)
  1. Do you need a cable modem for every type of internet?
  2. When does your provider's gateway mean you don't need to buy a modem?
  3. Which modem fits your provider and speed tier?
  4. When is buying your own cable modem the better move?
  5. Do you need a separate router with a cable modem?
  6. What changes if you have home phone service?
  7. How do you set up a new cable modem?
  8. Does an old modem still work on a new plan?
  9. How do you choose between a modem and a gateway?
  10. The bottom line

Yes, you need a cable modem for cable internet. Either rent a gateway from your provider or buy your own modem and pair it with a separate Wi-Fi router.

The question "do i need a cable modem" usually means "do I need to buy one," and the answer is that you need the function, not necessarily the box you buy at retail.

A modem turns the signal on your coaxial line into internet your devices can use. Without one, nothing in your home connects to a cable network.

What you choose is whether that modem comes from your provider as a rental or sits on your shelf as your own hardware.

This guide covers when a modem is required, when it isn't, and how to pick one that fits your provider and speed tier. If you already know you want to buy, the best DOCSIS 3.1 cable modems roundup compares current models.

Do you need a cable modem for every type of internet?

No, only for cable internet. The modem is specific to the network type: coaxial cable service needs a cable modem, while fiber, DSL and satellite each use different hardware.

Cable internet arrives on the same coaxial cable that once carried cable TV. A cable modem speaks the DOCSIS standard, which is the language cable networks use to send data over that line.

That is why a cable modem won't work on a fiber line, and fiber equipment won't work on cable.

Service typeModem neededWhat connects the line
Cable (Xfinity, Spectrum, Cox)Yes, a cable modemCoaxial cable, DOCSIS
FiberNo, uses an ONTFiber optic line
DSLNo, uses a DSL modemPhone line
SatelliteNo, uses a provider dish and routerSatellite dish

If your address offers fiber and cable, the hardware you need changes with the plan you buy. Moving between the two usually means swapping equipment, not reusing the same modem.

Check the connection at your wall before shopping. A round screw-on coaxial connector points to cable service.

A fiber jack or phone jack means a cable modem isn't the right device for that line. ARRIS says the Surfboard S34 is not compatible with fiber, DSL or satellite services, so confirm your line type before you order.

When does your provider's gateway mean you don't need to buy a modem?

A provider gateway includes the modem, so you don't have to buy one if you accept the rental. Most cable companies offer a combined modem and router as a single unit, often for a monthly fee.

A gateway does both jobs in one box. The modem half handles the cable signal and the router half broadcasts Wi-Fi.

For a small apartment or a household that wants one simple setup, that's enough.

The trade-off is control. You rent the unit, pay the fee for as long as you keep it, and usually can't upgrade the Wi-Fi portion when a faster standard arrives.

Many gateways also lock down settings that a standalone router exposes.

Buying your own modem changes the math. You pay once for the hardware and stop paying the equipment charge.

ARRIS markets the Surfboard S34 as a way to save on rental fees, though the actual saving depends on your provider's monthly charge.

The catch is that a modem alone doesn't give you Wi-Fi. You need a router or mesh system too, so the total cost is modem plus router.

That often still beats years of rental fees, but it's not a straight swap. The Surfboard S34's compact footprint, at roughly 10.55 by 6.75 by 2.46 inches, means it takes little shelf or cabinet space beside the router you add.

Which modem fits your provider and speed tier?

Match the modem to your provider's approved list and your plan's top speed. A modem that's certified and fast enough for your tier does the job; one that isn't may fail to activate or cap your speed.

Major cable providers publish lists of approved devices. The ARRIS Surfboard S34 and Motorola MB8611 are both CableLabs certified and tested for use with Xfinity, Spectrum and Cox.

Still confirm your specific model and speed tier before ordering, because approval can vary by region and plan.

ModelEthernet portsMax downstreamWorks with
ARRIS Surfboard S342.5 Gbps + 1 Gbps2.5 GbpsXfinity, Spectrum, Cox
Motorola MB86112.5 Gbps2.5 GbpsXfinity, Spectrum, Cox

What to check on the approved device list

Start with the speed tier you pay for. If your plan tops out at 1 Gbps, a modem with a 1 Gigabit port is enough.

For multi-gig plans, you want a 2.5 Gigabit port so the modem doesn't become the bottleneck.

Next, check the DOCSIS version. DOCSIS 3.1 modems handle current multi-gig plans and are backward compatible with older 3.0 networks.

A 3.0 modem still works on slower tiers but limits what you can upgrade to later. The Motorola MB8611, for example, stays backward compatible with 32x8 DOCSIS 3.0 service while covering 3.1 tiers.

Finally, look at the port count if you have wired devices. Two Ethernet ports let you connect a router and one wired device directly.

A single port means everything runs through the router. The S34 pairs a 2.5 Gigabit port for your router with a 1 Gigabit port for a wired device or backup handoff, while the MB8611 offers a single 2.5 Gigabit port.

When is buying your own cable modem the better move?

Buy your own modem when you want to stop paying rental fees and control your home network. It's the better move for most households that keep the same provider for more than a year or two.

The savings come from skipping the monthly equipment charge. Motorola says owning a modem typically saves a Comcast Xfinity household about 168 dollars per year in rental charges.

That figure varies by provider, but the pattern holds: the longer you stay, the more the purchase pays off.

Buying also gives you hardware you can keep or resell if you switch plans within the same cable network. A certified DOCSIS 3.1 modem like the Motorola MB8611 stays useful across speed upgrades, and its 2.5 Gigabit port covers multi-gig plans.

The MB8611 adds active queue management, which Motorola says reduces latency for gaming, streaming and video conferencing.

The main cost is the router. If you already own a good router, adding a modem is a simple upgrade.

If you don't, price the router in before deciding the switch saves money. Both modems here carry a 2-year manufacturer warranty, which covers the hardware long after the first year's rental fees would have added up.

Skip buying if you move often, rent short-term, or want zero setup fuss. A provider gateway is easier to swap when you change addresses or providers.

Do you need a separate router with a cable modem?

Yes, a standalone cable modem needs a separate router for Wi-Fi. The modem only converts the cable signal to Ethernet; the router creates the wireless network your phones, laptops and TVs join.

The modem's Ethernet port connects to the router's WAN port with a network cable. The router then handles Wi-Fi, device addressing and the firewall.

Without it, you have a live internet connection but no wireless coverage.

That's why modem listings say "modem only, router required." The ARRIS Surfboard S34 states it needs a separate Wi-Fi router or mesh system.

The Motorola MB8611 pairs with any Wi-Fi router. Neither broadcasts Wi-Fi on its own.

Some homes skip the router by using a gateway instead. A gateway bundles both functions and is the simplest one-box option.

The downside is less flexibility: you replace the whole unit when either half ages out.

If you plan to keep your current router, a modem-only box is the cleaner path. Check that your router's WAN port is at least as fast as the modem's Ethernet port, or the router caps your speed.

A 2.5 Gigabit port on the modem only pays off when the router can accept that rate.

A network cable matters here. The Jadaol Cat 6 Ethernet Cable, 50 ft is a flat 50 ft run that carries up to 10 Gbps between modem and router.

It's long enough to reach a router placed across the room.

What changes if you have home phone service?

Cable internet and home phone can share a line, but they need the right modem. If you keep a landline through your cable provider, a standard data-only modem won't carry the phone signal.

Providers that sell voice service usually supply a gateway with a phone port, or offer a voice-capable modem. A plain modem like the Surfboard S34 handles internet only.

For a phone line, you need hardware with the voice feature built in.

That changes the buy-or-rent decision. If you want to own your equipment and keep the landline, look for a voice-capable model approved for your provider.

Our guide to the Xfinity voice modem covers when a home phone needs its own hardware.

Most households that dropped the landline years ago don't have this problem. If you still use a home phone for work or family, factor it in before buying a data-only modem.

Also confirm whether the voice modem your provider approves costs more than the rental, since not every voice-capable unit is sold at retail.

How do you set up a new cable modem?

Setup is three connections and a call to your provider. Connect the coaxial cable, plug in power, then link the modem to your router with Ethernet.

After that, activate the modem with your provider.

The Motorola MB8611 describes this exact sequence: power, coax and Ethernet. The ARRIS Surfboard S34 adds activation with your cable provider, then a router connection for Wi-Fi coverage.

Most cable modems follow the same steps.

  1. Screw the coaxial cable onto the modem's cable port and hand-tighten it.
  2. Plug the modem into a wall outlet and wait for its status lights to settle.
  3. Connect the modem's Ethernet port to your router's WAN port.
  4. Call or use your provider's app to activate the modem and register its ID.
  5. Reboot the router and test the connection on a wired device first.

Activation usually needs the modem's MAC address and serial number. Have them ready before you call.

The provider confirms the device is approved for your tier and pushes the settings that bring it online. The S34's LED indicators for power, upstream and downstream, and online status tell you when the modem has locked onto the network and is ready for activation.

Does an old modem still work on a new plan?

An older modem may work on a slower plan but can hold back a faster one. The modem's port speed and DOCSIS version set the ceiling, no matter what plan you pay for.

A 1 Gigabit port caps your wired speed near 1 Gbps, so a multi-gig plan can't deliver its full rate through that modem. A 2.5 Gigabit port removes that limit for current plans.

Providers also raise minimum device requirements over time.

If your modem is several years old and your provider just bumped your speed tier, check whether it's still approved. Many providers retire older models as they roll out faster service.

Our guide on do i need a new cable modem walks through the signs it's time to replace one.

A certified DOCSIS 3.1 modem with a 2.5 Gigabit port is the safe buy today. It covers current plans and the next generation of upload speeds.

That's why the modem for gigabit internet options all center on 2.5 Gigabit ports. The S34's upstream support for next generation upload tiers is a step beyond a modem that only handles the older upload rates.

How do you choose between a modem and a gateway?

Pick a modem plus router if you want control and lower long-term costs; pick a gateway if you want one box and simple support. The right answer depends on how much you care about Wi-Fi settings and rental fees.

A modem-only setup costs more upfront because you buy two devices. Over time it usually wins, since you stop paying rent and can upgrade either piece alone.

It also lets you choose a router that matches your home's size and layout.

A gateway is simpler. One box, one provider to call, one device to swap if something fails.

That suits renters, small apartments and anyone who would rather not manage network settings.

The middle path is buying a modem and keeping a router you already own. That's the cheapest way to stop renting while avoiding a router purchase.

It works best when your current router still handles your Wi-Fi needs well.

Whichever you choose, confirm the hardware is approved for your provider and speed tier first. That single check prevents most activation problems.

Then decide how much control you want over the network after it's running.

The bottom line

You need a cable modem for cable internet, but you don't always need to buy one. Rent a provider gateway if you want one box and simple support; buy your own modem if you want to stop paying rental fees and control your network.

The clear pick for most people buying their own is the ARRIS Surfboard S34. Its 2.5 Gigabit Ethernet port handles multi-gig plans and next generation upload speeds, and it's certified for Xfinity, Spectrum and Cox.

Pair it with your own router for Wi-Fi.

Choose the Motorola MB8611 if you already own a router and want a straightforward multi-gig modem with active queue management for lower latency. Add a flat Cat 6 cable for the modem-to-router run so the connection isn't the weak link.

The Jadaol cable's flat shape runs cleanly along walls and under carpet, which helps when the modem and router sit in different rooms.

Skip buying altogether if you rent short-term or want zero setup. A gateway does the job, and you can always switch to owned hardware when you settle into a longer plan.

Check your provider's approved device list and speed tier before you order anything.

Frequently asked questions

Can I use a cable modem with fiber internet?

No. A cable modem works over a coaxial cable connection.

Fiber, DSL and satellite services use different hardware, so you need the equipment your provider supplies or approves for that type of line.

Does a cable modem give me Wi-Fi?

Not by itself. A plain cable modem only translates the cable signal into an Ethernet connection.

You add a Wi-Fi router or mesh system to broadcast wireless coverage through your home.

Will my internet provider let me use my own modem?

Most major cable providers allow it, and the ARRIS and Motorola models here are CableLabs certified for use across US cable networks. Confirm the specific model is supported for your speed tier before you order.

How do I know if I need a cable modem or a gateway?

A modem pairs with a separate router and suits homes that want control over the router or already own one. A gateway combines both in one box and is simpler for small homes, but you can't upgrade the Wi-Fi part alone later.

What speed modem do I need for my plan?

Match the modem to your plan's top speed and your provider's approved device list. A modem with a 2.5 Gigabit Ethernet port covers multi-gig plans, while an older 1 Gigabit port caps your wired connection at that rate.

Can I skip the modem and connect straight to the internet?

No. Some device has to translate the cable signal into a network your router or computer can use.

That job falls to a modem or a provider gateway, so one of the two must be in the chain.